ABB 渦流流量計，1 1/2英寸法蘭連接，蒸汽，VT4.3.1.1.1.40.QA1.5.A.2.

ABB 渦流流量計，1 1/2英寸晶圓連接，蒸汽

高度準確的測量液體，蒸汽和氣體的沉積物的影響

用于液體和氣體和蒸汽的±1％的精確度為±0.75，流速

全方位的規模試驗廠和過程領域的應用

先進的處理器提供了大量的監測和控制選項

模擬和HART輸出

憑借強大的設計和數字信號處理，這些儀表提供所有渦流技術最好的好處。身體，卸貨和傳感器都是316L SS增加耐用性。NEMA 4X（IP67）轉換器外殼環氧涂層鋁，可以承受惡劣的過程環境。同樣重要的是在流量計的性能是該轉換器的設計。所有編程可以通過集成三個按鈕的鍵盤或通過使用ABB磁鐵棒和不打開轉換器外殼，從程序菜單中選擇“參數”。

編程時，你可以設置發射機參數的模擬輸出和下限報警輸出流量或脈沖輸出。電子允許過濾和/或低流量截止的輸出限制控制流量波動條件的情況下中斷。所有編程參數都存儲在一個孤立的EEPROM長達10年無電源。

為了提供最佳的功能，渦街流量計的流動剖面應盡可能不受擾動。這是通過使用15倍管道直徑的長度和一個出口邊的5倍管道直徑的直入口部分。

Vortex Flowmeter, 1 1/2" Wafer Connection, for Steam

Highly accurate measurement of liquids, steam, and gases unaffected by sediments

Accuracy of ±0.75 of flow rate for liquids and ±1% for gases and steam

A full range of sizes for pilot plant and process area applications

An advanced processor provides numerous monitoring and control options

Analog and HART out

With a robust design and digital signal processing, these meters provide all of the best benefits of vortex technology. The body, shedder, and sensor are all 316L SS for added durability. The NEMA 4X (IP67) converter housing is epoxy-coated aluminum that can withstand harsh process environments. Just as important to the performance of the flowmeter is the design of the converter. All the programming can be done either through the integrated three-button keypad or by using the ABB Magnet Stick and select parameters from the programming menu without opening the converter housing.

When programming the unit, you can set transmitter parameters for the analog output and a limit alarm output for flowrate or pulse output. The electronics allow for filtering and/or a low flow cutoff of the output to limit control disruptions in the event of fluctuating flow conditions. All programmed parameters are stored in an isolated EEPROM for up to 10 years without power.

In order to provide optimum functionality, the flow profile of the vortex flowmeter should be as undisturbed as possible. This is achieved by using a straight inlet section with a length of 15 times the pipe diameters and an outlet section of 5 times the pipe diameter.