Performance Profi le

Flow Control Accuracy ± 5% of set-point after calibration

Typical Run Time Battery: 5 hrs at 15 L/min with spore trap cassette (VersaTrap)?

4 hrs at 28.3 L/min with BioStage viable cascade impactor

9+ hrs at 10 L/min with 25-mm, 1.2-μm MCE fi lter

(Note: To achieve, use QuickTake 30 with a fully charged battery and

AC charger/adapter)

 > 14 hrs at 10 L/min with 37-mm, 0.8-μm MCE fi lter

Charge Time

(varies with battery capacity

and level of discharge)

Approximately 5 hrs with approved charger

Temperature Range Operating: 32 to 104 F (0 to 40 C)

Storage: -4 to 95 F (-20 to 35 C)

Charging: 32 to 113 F (0 to 45 C)

Operating Humidity 0 to 95% non-condensing

Timer Display Range 1 to 999 min. If run time exceeds 999 min, timer display rolls over and repeats 1 to

999-minute runs until user stops pump or power supply is depleted.

Flow Fault If the pump is not able to compensate due to excessive back pressure, a fl ashing FLOF

will appear on the LED. If the fault is not corrected within fi ve seconds, the pump will beep

four times and stop running.

? Sampling time is usually ≤ 10 minutes; however, SKC recommends reducing length of sample time when using a 30 L/min flow rate to prevent

overloading the media.