Instruction for Use

Mixing Ratio(volume) 3 parts1 partBase 23T3-XXXCuring Solution PC-216

Where VOC regulations allow and depending on temperature and humidity

conditions, additional thinning may be made with 66C28, 66C20, TR-19, TR-20

or TR-115. Up to 1 part thinner may be used.

- Stir or shake base material thoroughly until all pigment is uniformly

dispersed before adding curing solution.

- Stir the catalyzed mixture thoroughly and the material is ready to apply by

brush or spray.

Induction Time NoneInitial SprayingViscosity

(25oC/77oF)

16 – 24 seconds ISO Cup #6

15 – 27 seconds Signature Zahn Cup #3

The uses of Signature Zahn Cups for viscosity are requirements of the

referenced specifications, and the ISO Cup measurement is provided only as a

reference for field application. They are not provided as quality control values.

Note Viscosity measurements are provided as guidelines only and are not to be

used as quality control parameters. Certified information is provided by

certification documentation available on request.

Pot Life

(25oC/77oF) After 1 hour: 72 seconds ISO Cup #6

After 2 hours: Sprayable.

Dry Film

Thickness(DFT)125 – 250 microns (?m)

5 – 10 milsApplicationRecommendations

Conditions Temperature:Relative Humidity:

15 – 35°C

59 – 95°F

35 – 75%

Note The quality of the application of all coatings will be influenced by the spray

equipment chosen and the temperature, humidity, and air flow of the paint

application area. When applying the product for the first time, it is

recommended that test panels be prepared in order to identify the best

equipment setting