DP 2087 is a one-part solvent based neoprene adhesive and sealant. The material

cures on exposure to the air by loss of solvent to form a tough, resilient synthetic rubber

compound.

USES

The sealant has excellent adhesion to a wide range of materials, and its gap filling

properties combined with high bond strength make the product ideal for bonding uneven

surfaces. The cured material can be over painted. The material is suitable for use in a

wide range of industries, including:- building, insulation, road vehicle, vehicles, caravans,

and domestic appliances. It has outstanding adhesion to steel and glass and is suitable

for interior and exterior use. Other uses include:- glazing in the building industry,

bonding acoustic tiles, panels, skirting and architraves. No primer is necessary.

TYPICAL APPLICATIONS

As a sealant:

* Sealing seams in the manufacture of containers, commercial vehicles, caravans,

rolling stock, refrigerators and other domestic appliances.

* Sealing between glass, wood and metal in glazing.

* General purpose sealant in automotive body joints and boat joints.

As an adhesive:-

* Fixing decorative wall panels, boards and insulating panels (hardboard, plywood,

wood fibre, rigid PVC, glass reinforced plastic, cork, polyurethane insulating

panels and chipboard).

* Bonding timber battens.

* Fixing timber and PVC skirting, covings, architraves and sills.

* Bonding carpet grippers and stair nosing.

METHOD OF APPLICATION

1. All surfaces must be thoroughly clean, dry, sound and frost free. Remove all

traces of foreign matter and loose materials.

2. Cut tip off cartridge end thread, screw on nozzle, cut 450 to required size and fit

into a Skeleton Gun.

3. As a sealant:

Extrude sealant firmly into joint sides to ensure complete contact. Smooth finish if

necessary with spatula wetted in white spirit.

OR

As an Adhesive:

a) Bonding panels:- Apply a continuous 6mm bead to back of panel 50mm in from

the edge and across the panel at 350-400mm centres. Position the panel, press

home firmly and leave to set.

b) Fixing skirting, architraves, battens, sills etc.:- Apply either one or two 6mm

beads to the reverse side, press into position a