TYPICAL PRODUCT DATA:

Solid Content %: 40 +/- 1

Coverage: One gallon (8#) will cover 200 sq. ft. 2 mils thick or 22 sq/ft /lb

Color: Translucent

Viscosity: 1800 cps (78F) sq ft/

Flash Point: 42F

Storage Stability (77F) closed container: 6 months

High Temperature Resistance(intermittent): 500F

Specific Gravity: 1.00 +/- 0.02

Peel Tests (MIL A-25457B): 10 LB/INCH (72 HOUR CURED)

TACK GM/CM2: 850

CAUTION:

Contains flammable solvents. Keep away from excessive heat and open flame. Wear impervious gloves and eye protection. The A-400 B curing

agent is a severe eye irritant. Mix in a well ventilated explosion-proof area.

MIXING INSTRUCTIONS:

A-400 A/B can be air or heat cured when proper curing agent is used as follows:

A-400 B (air cure): Use 10 parts addition per 100 parts of A-400 A. Faster cure time and shorter pot life will result from addition of catalyst greater

than 10%.

Surface Preparation:

1. Clean surfaces to be bonded with IPA OR REQUIRED SOLVENT

2. Brush coat onto bonding surfaces 4 - 5 mils thick.

3. Allow 15 - 30 minutes for solvent to flash off.

4. Press bonding surface