ELECOLIT 414 is a polyester - based, electrically conductive ink, coating and adhesive suitable for application

by stamping, screen printing, dipping and syringe dispensing.

ELECOLIT 414 is formulated to provide exceptional conductivity when cured at low temperatures. Unlike

conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for

ELECOLIT 414 include, but are not limited to, EMI/RFI shielding of polyimide flexible circuits, polymer thick film

circuitry, membrane switches, electrical attachments for surface mounted devices and anode coatings for

tantalum capacitors.

TYPICAL CURED PROPERTIES

Consistency Smooth Paste

Filler Silver

Percent Silver, Cured 87

Crease Resistance Excellent

Volume Resistivity (ohm-cm) (700C) 0.00005

Sheet Resistivity(ohm/sq/mil) (700C) 0.02

Solderable NO

Hydrolytic Stability Excellent

Useful Temperature Range -650C to + 2000C

Thermal Stability Good to 3250C

SUGGESTED HANDLING AND CURING

ELECOLIT 414 is ready to use as supplied. Further thinning may be accomplished by adding small amounts of

Buthyl Cellosolve Acetate. Prior to using, be certain to re-suspend silver by thorough mixing. Best properties for

most applications, result when cured for several minutes at 1250C to 1500C. Good properties are obtained on a

variety of substrates by dry and curing for 15 minutes at 700C. End user is advised to experimentally determine

temperature and time best suited for individual applications.

STORAGE

Shelf Life: 6 months at 250C, or 9 months at 50C, or 12 months at -100C

SAFETY AND HANDLING

Use with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged contact with skin and

breathing of vapours. Wash with soap and water to remove from skin.