OXYLUBE Spray provides a very high

content molybdenum disulphide film.

It is designed to lubricate sliding mechanisms such

as plain bearings, pins, cams and slides particularly

in oxygen or vacuum environments.

ROCOL OXYLUBE Spray is also suitable for

applications where contamination by aggressive

chemicals or petroleum based solvents, oils and

greases would destroy conventional lubricants.

Product Overview

Features and Benefits

? Temperature range of applied film -200°C to

+450°C.

? Dry film lubrication – resists pick up of

contaminants.

? Inorganic resin bonded - suitable for oxygen

and vacuum environments.

? Prevents galling, pick-up and seizure.

? Resistant to high loads (up to 7,000 kg/cm2

).

? Excellent wear resistance (high molybdenum

disulphide content).

Pack Sizes

Directions for Storage and Use

? Ensure surfaces to be treated are clean, dry

and free from oil, grease or dirt contamination.

? Shake aerosol thoroughly for 2-3 mins after

agitator ball begins to rattle.

? Hold upright and apply a thin even coating from

approx distance of 10-15 cm (4-6 inches).

? Use only in well ventilated areas.

? After use, invert the can and spray until nozzle

is clear.

? Film will be touch dry in 2-3 mins, leave at least

10-15 mins for complete cure @ 20°C.

? The cured film can be improved by lightly

burnishing with a lint free cloth.

? The storage temperature should be kept below

+50°C, and the storage area should be out of

direct sunlight.

? Shelf life is 4 years from date of manufacture.

Typical Applications

ROCOL OXYLUBE Spray is ideal for use as an assembly

and dry film lubricant for sliding mechanisms,

plain bearings, valve seats etc.

Pack size Part Code

400ml 10125

Specifications

? Rolls Royce Specification – R-R OMAT 4/54

? Naval Cat No.:

? 0475-224-1963

? NATO Stock No.:

? 9150-99-224-1963