PRODUCT NAME: SANTOTRAC? 50 Traction Lubricant Company Name: Arch Technology Holding LLC Chemical Family: Synthetic Hydrocarbon Chemical Name: CHEMICAL EMERGENCY: Call CHEMTREC 1-800-424-9300 or 703-527-3887 2. COMPOSITION/INFORMATION ON INGREDIENTS Synthetic Hydrocarbon: 70 –99% Zinc Dialkylthiophosphate: Maximum 3% 3. HAZARDS IDENTIFICATION Primary routes of exposure: Eye contact: Material can cause slight to moderate irritation. Skin contact: Slight to moderate irritation is expected. 4. FIRST AID MEASURES EYES: Immediately flush with plenty of water for at least 15 minutes. Call a physician. SKIN: Wipe off excess and wash with soap and plenty of water. Remove contaminated clothing. Wash clothing before reuse. 5. FIRE FIGHTING MEASURES Flash Point: 325°F (COC) Auto Ignition Temperature: 620°F Extinguishing Media: Water spray, foam, dry chemical, carbon dioxide or any Class B extinguishing agent. Santotrac 50 潤滑油 MSDS 上海匯分電子科技有限公司 地址：上海市天目西路 547 號恒基不夜城 1 號樓 2203 室 郵編：200070 電話：+400-660-9565 傳真：+86-21-5206-1832 http://m.antelyle.com 電郵：micron365@gmail.com Special Fire Fighting Procedures: Fire fighters or others likely to be exposed to products of combustion should wear full protective clothing including self-contained breathing apparatus. Equipment should be thoroughly decontaminated after use. Unusual Fire and Explosion Hazards: Products of decomposition include carbon monoxide, carbon dioxide, and hydrocarbons. 6. ACCIDENTAL RELEASE MEASURES IN CASE OF SPILL OR LEAK: Absorb with a suitable media such as sawdust, clay or filtercel. 7. HANDLING AND STORAGE SANTOTRAC? 50 lubricant is stable under ordinary handling and storage conditions. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Eye Protection: Santotrac? 50 Traction Lubricant causes only slight eye irritation. No special protection required. Avoid eye contact as good industrial practice. Skin Protection: Wear appropriate protective gloves that provide a barrier and protective clothing to prevent skin contact. Consult glove manufacturer to determine appropriate type glove for given application. Wear face shield and apron when splashing is likely. Wash contaminated skin promptly. Launder contaminated clothing and clean protective equipment before reuse. Wash thoroughly after handling. Respiratory Protection: Avoid breathing vapor or mist. Use NIOSH/MSHA approved equipment. The respirator use limitations specified by NIOSH/MSHA or the manufacturer must be observed. High airborne concentrations may require use of self-contained breathing apparatus or supplied air respirator. Respiratory protection programs must be in compliance with 29 CFR 1910.134. Ventilation: Provide ventilation to minimize exposure. Use local mechanical exhaust ventilation at sources of air contamination such as open process equipment.