The solvent is non-flammable, has low toxicity and provides acceptable environmental properties for today's demanding electronic applications. When applied to clean, moisture-free surfaces such as copper, aluminium, ceramic, steel, tin or glass, Certonal FC-742 dries to a thin transparent film with excellent anti-wetting, anti-stiction, anti-migration, and anti-corrosion properties required in many diverse applications. Certonal FC-742 will form a clear, nearly invisible, uniform film that is insoluble in solvents such as heptane, toluene and water. The polymer covalently bonds to glass and metal oxide layers. These films can endure up to 175°C for prolonged periods and maintain good repellency.
The low surface energy films cast from Certonal FC-742 have excellent repellency to hydrocarbon oils, silicone oils, synthetic fluids and aqueous solutions. With a surface energy of 11-12 dynes/cm, Certonal FC-742 films compare favourably to coatings of polyethylene and polytetrafluoroethylene, which have surface energy values of approximately 31 and 18 dynes/cm respectively. This property enables non-solubilising solvents such as heptane, toluene and water as well as liquids having low surface tension values such as lubricating oils, silicones etc. to bead and drain freely from surfaces coated with Certonal FC-742 while leaving the film intact. FC-742 coating exhibits many of the practical characteristics desired in a coating system, as seen below, making it especially well-suited for many applications.
Certonal FC-742 is an extremely stable surface modifier fluoropolymer rich in carbon-fluorine bonds. Carbon-fluorine bonds give the coating it's stable characteristics. The dry film is both oleophobic and hydrophobic. As the surface energy is so low, in comparison to coatings based on polyethylene and PTFE, many materials with low surface tension characteristics, such as silicone oils and lubricating oils, bead and drain freely from a Certonal FC-742 coated surface. The low surface energy of the coating also helps to prevent solid materials adhering to the surface.
Certonal FC-742 can be used as an anti-migration barrier to prevent lubricant materials migrating from critical wear components in gyroscopes, precision bearings, MEMS spindles and similar mechanical, critical wear devices.
The application of Certonal FC-742 should be carried out in a controlled manner to maintain careful management of the solids content. Acota provide a range of equipment designed for controlled application of Certonal FC-742. The equipment applies the material by dip application, which maintains consistent solids content, thus ensuring uniform dry film application. Acota systems are designed to ensure that the coated products emerge dry from the system and all solvent is recovered which in turn helps to maintain a consistent solids content.
| Property |
Value |
| Solids content by weight (% in solution) |
2% |
| Specific gravity of fluid at 25°C |
~1.5 |
| Solvent |
Highly
fluorinated liquid |
| Flash point |
None |
| Thermal stability of dry film |
Stable
to 175°C |
| Viscosity |
0.58
cps |
| Refractive Index |
1.39 |
| Surface Energy of dry film (dynes/cm) |
11月12日 |
| Approximate dry film thickness |
~
1.0 micron |
| Dielectric strength (25°C, 30% RH 500v/s) |
1.2
Kv / 25.4 microns |
| Coverage per kg |
12m2 |
| Tg of dried film |
-66°C |
| Continuous operating temperature range |
-65°C
to +175°C |
| Flammability of dry film |
Self-extinguishing
UL94V(0) |
| Thermal shock per Mil-I-46058c |
Pass |
| Ease of application |
Excellent |
| Diluent / chemical |
FC-736 |
| Ease of cure / dry |
For
best results the coating should be thermally cured |
| Application method |
Dipping
is preferred but spray and brush application work well |
| Environmental |
Low
in toxicity, non-flammable. |
Nano電子商城-亞太領先的MRO產品資訊平臺！ Nano電子商城還為您提供專業的技術支持和具有競爭力的價格，請您放心購買！ Nano電子商城聲明: 因廠家會在沒有任何提前通知的情況下更改產品包裝、產地或者一些附件，Nano電子商城不能確保客戶收到的貨物與Nano電子商城網站圖片、產地、附件說明完全一致。只能確保為原廠正品！若本網站沒有及時更新，敬請諒解！
相關商品