Spirax Sarco TD52 3/8" 54529C 蒸汽處理配件

緊密關閉防止浪費寶貴的蒸汽

性價比高，小型設計使得它們需要大小，高效運作的排水蒸汽管道，蒸汽伴熱管線，小型工藝設備的理想選擇。

從熱力學（TD）U形彎管排放接近蒸汽溫度，保持蒸汽空間無冷凝。

不銹鋼構造，TDU形彎管承受過熱，冷凍，腐蝕性的冷凝水錘和振動。

注：最小壓力令人滿意的運作是3.5 PSIG。在任何條件下操作最大背壓不超過80％的進氣壓力，否則防氣閥可能不會關閉。典型應用：

蒸汽排水干管和管線

工藝設備

洗衣及廚房設備

過熱蒸汽應用

室外安裝受冷度影響

The tight shut-off prevents valuable steam from being wasted

Cost effective, compact design makes them ideal for drainage of steam mains, steam tracing lines, and small process equipment where size and efficient operation are important.

Discharge from Thermo-Dynamic (TD) traps is close to steam temperature—steam space is kept free from condensate.

Constructed of stainless steel, TD traps withstand superheat, waterhammer, freezing, corrosive condensate, and vibration.

Note: Minimum pressure for satisfactory operation is 3.5 psig. Maximum back pressure should not exceed 80% of the inlet pressure under any conditions of operation, otherwise the trap may not shut.

Typical applications:

Steam main drain and tracer lines

Process equipment

Laundry and kitchen equipment

Superheated steam applications

Outdoor installations subject to freezing