Cole-Parmer 5057CP 計數控制器

Cole-Parmer 5057CP 計數控制器

自動操作，讓您遠離設備。

程序設置不到5秒

符合NIST溯源標準 - 定時精度為0.01％

控制器執行再現的攪拌，加熱或抽時間。用于定時關機或反復開/關定時在試驗過程。手動暫停開關將覆蓋程序不打擾它，并可立即關掉設備。內置鎳鎘電池在停電的情況下位置程序。三相接地插座繼電器裝置，120伏，115安培，1800瓦特，和1/3馬力。

型號94400-62 WalkAway 關斷控制器計數，將任何一件裝備在設定的時間結束。可編程在三個區間設置：99.99秒，0.01秒1分鐘到9999分鐘，1小時至9999小時。

型號94400-64 WalkAway重復導通和截止控制器計數，將任何設備上的一個編程時間和關閉不同的編程時間。重復的功能會自動開啟和關閉程序的時間NTIL手動停止繼續騎自行車。可編程自動開關閉時間期間在三個間隔設

置：1秒至99秒，1分鐘，99分鐘，1小時至99小時。

兩款型號包括由制造商提供NIST可溯源校準報告。

Automatic operation allows you to walk away from the equipment.

Program setting in less than 5 seconds

Meets NIST traceability standards - timing accuracy is 0.01%

Controllers perform reproducible stirring, heating, or pumping times. Used for timed shutdown or repeated on/off timing during any test. A manual pause switch overrides the program without disturbing it, and permits equipment to be switched off instantly. Supplied internal nicad battery maintains programs in the event of a power outage. Three-pronged grounded receptacle relay for apparatus to 120 VAC, 115 amps, 1800 watts, and 1/3 horsepower.

Model 94400-62 Walkaway turn-off controller counts up and turns any piece of equipment off at the end of a set time period. Programmable in three interval settings: .01 second to 99.99 seconds, 1 minute to 9999 minutes, and 1 hour to 9999 hours.

Model 94400-64 Walkaway repeat turn-on/turn-off controller counts up and turns any piece of equipment on for a programmed time and off for a different programmed time. Repeat features automatically continues cycling on and off programmed times ntil manually stopped. Programmable for separate on and off timng periods in three interval setting: 1 second to 99 seconds; 1 minute to 99 minutes, and 1 hour to 99 hours.

Both models include an NIST-traceable calibration report supplied by the manufacturer.