Masterflex? 77965-10 I / P ?精密無刷水泵與模擬遙控器和高性能泵頭，115/230 VAC

Masterflex? I / P ?精密無刷水泵與模擬遙控器和高性能泵頭，115/230 VAC

Masterflex? I/P? precision brushless pump with analog remote and High-Performance pump head, 115/230 VAC

流量：0.7至17 LPM（0.2?4.5 GPM），包括I / P ? 88管，流速取決于電機轉速和泵管尺寸。

三轉彎的速度控制提供精確度和可重復性的LED顯示屏顯示分辨率1％％的速度

1/3-hp無刷電機以最少的維護處理具有挑戰性的應用

非芯片的環氧樹脂涂層，IP55防護等級的鋼和鋁外殼保護防潮，抗化學品，灰塵

緊湊型驅動器是重量輕，攜帶用一只手，但強大到足以驅動兩個泵頭

I / P ?無刷工藝驅動器提供重型性能要求苛刻的過程應用。樂百氏，1/3-hp無刷電機驅動兩個泵頭任何油管制定，同時消除了碳刷更換的成本和不便。

遠程輸入：4至20 mA，0?10 V，啟動/停止和扭轉（需要附件77300-32遠程電纜套件，單獨出售）

遠程輸出：“泵準備就緒”的信號和4至20 mA輸出（需要附件77300-32遠程電纜套件，單獨出售）

啟動/停止，改變泵的方向，或交換機之間的本地和遠程控制使用密封的鍵盤有獨立的開/關開關和三轉的速度控制電位器。

包括： 6英尺（1.8米）與IEC320/CEE 22連接器耦合線15針圓形水

Flow: 0.7 to 17 LPM (0.2 to 4.5 GPM) with included I/P? 88 tubing; flow rate depends on motor rpm and tubing size.

Three-turn speed control offers precision and repeatability—LED display shows percent speed with 1% resolution

1/3-hp brushless motor handles challenging applications with minimal maintenance

Non-chip epoxy-coated, IP55-rated steel and aluminum enclosure protects against moisture, chemicals, and dust

Compact drives are light enough to carry with one hand, but powerful enough to drive two pump heads

I/P? brushless process drives offer heavy-duty performance for demanding process applications. Robust, 1/3-hp brushless motor drives up to two pump heads with any tubing formulation, while eliminating the cost and inconvenience of brush replacement.

Remote inputs: 4 to 20 mA, 0 to 10 V, start/stop, and reverse (requires 77300-32 remote cable kit, sold separately)

Remote outputs: “pump ready” signal and 4 to 20 mA outputs (requires 77300-32 remote cable kit, sold separately)

Stop/start, change pump direction, or switch between local and remote control using the sealed keypad with separate on/off switch and three-turn speed control potentiometer.

What’s included: 6-ft (1.8-m) line cord with IEC320/CEE 22 connector coupler; 15-pin circular water