Masterflex? 07575-10 L / S數字處理驅動器與不銹鋼外殼，0.1至600 RPM，115/230 VAC

Masterflex? L / S數字處理驅動器與不銹鋼外殼，0.1至600 RPM，115/230 VAC

Masterflex? L/S Digital Process Drive with Stainless Steel Housing, 0.1 to 600 RPM, 115/230 VAC

流體輸送，分配，在實驗室和計量應用，流程和沖洗環境的理想選擇

316不銹鋼外殼是完全密封的IP66和NEMA 4X額定

直沖式驅動器是易清潔，耐常用的清洗和消毒的解決方案只是軟管清潔

無刷免維護電機提供±0.1％的速度控制精度1量程比6000

全遙控功能允許方便地集成到自動化流程

流速：0.006至3400毫升/分鐘（至54 GPH）與L/S油管。流量取決于驅動器轉速和泵管尺寸。

圖形液晶顯示四種工作模式，連續運行，定時分配，復制分配量分配。泵的性能不斷

菜單驅動的界面，可以選擇七種語言，編程及操作

免除：體積毫升（0.001?99999毫升），升和加侖;復制1到9,999分配周期;或SEC時間的時間間隔，每次分配周期（1秒到99小時59分59秒）

通過密封圓形連接器驅動器上的遠程控制：

-速度控制輸入0至20 mA，4至20 mA或0?10 V; 

-抽水方向需要集電極開路或觸點閉合

--開始/停止/清洗需要開放收藏家或觸點閉合; 

-轉速計輸出0至20毫安，4至20 mA，0?10 V，集電極開路

這些精密驅動器提供模擬遠程控制選項和簡單的編程自動化過程應用的理想選擇。驅動器具有可編程分配間隔，可以讓你設置方便，自動配藥分配循環之間的延遲。程序校準，確保分配和顯示精度驅動器存儲校準值每油管尺寸

驅動程序通過簡單的鍵盤膜，鍵盤鎖定/解鎖功能保護設置。汽車是可逆的，所以您可以清除之前或之后，在任一方向的泵和泵液管包含的內容： 6英尺（1.8米）的線與IEC 22 320/CEE的連接器耦合器;水密線連接。在訂貨時指定目的地國家特定國家的插頭/電源線驅動器隨附。

Ideal for fluid transfer, dispensing, and metering applications in laboratory, process and wash-down environments

316 stainless steel housing is completely sealed—IP66 and NEMA 4X rated

Washdown drive is easy-to-clean and resistant to commonly used cleaning and sanitizing solutions—simply hose down to clean

Brushless, maintenance-free motor offers ±0.1% speed control accuracy with a 6000 to 1 turndown ratio

Full remote control capabilities allow easy integration into automated processes

Flow rate: 0.006 to 3400 mL/min (up to 54 GPH) with L/S tubing. Flow rate depends on drive rpm and tubing size.

Graphical LCD shows four operating modes continuous run, timed dispense, copy dispense, volume dispense. View pump performance continually

Menu-driven interface lets you select one of seven languages for programming and operation

Dispense by: Volume—in milliliters (0.001 to 99999 mL), liters, and gallons; Copy—1 to 9,999 dispense cycles; or SEC—time interval between each dispense cycle (1 sec to 99 hr, 59 min, 59 sec)

Remote control via sealed circular connector on drive: 

--Speed control input 0 to 20 mA, 4 to 20 mA, or 0 to 10 V; 

--Pumping direction requires open collector or contact closure; 

--Start/stop/purge requires open collector or contact closure; 

--Tachometer output 0 to 20 mA, 4 to 20 mA, or 0 to 10 V, open collector

These precision drives offer analog remote control options and simple programming—ideal for automated process applications. Drives feature a programmable dispense interval that lets you set the delay between dispense cycles for convenient, automated dispensing. Programmed calibration ensures dispense and display accuracy—drive stores one calibration value per tubing size.

Program the drive via the simple membrane keypad; keypad lock/unlock feature protects settings. Motor is reversible so you can purge tubing before or after pumping and pump fluid in either direction.

What's Included:

Six-foot (1.8-meter) line cord with IEC 320/CEE 22 connector coupler; watertight cord connection. Specify destination country when ordering; drive is shipped with country-specific plug/cord set.

產品規格
產品類型	泵驅動器
最大流量（毫升/分鐘）	3400
最小流量（毫升/分鐘）	0.006
控制類型	數字變頻調速
功率（安培）	230 VAC，1.1， 115 VAC， 2.2
馬力（HP）	1/10
電機功率（瓦）	75
電機的正反轉	是
轉	0.1至600
IP防護等級（驅動器）	IP66（NEMA 4X）
數字分配	是
尺寸（驅動器）	12“長 x 9英寸寬x 9.25”高 （30.5×22.9×23.5厘米）
速度控制	±0.1％  （分辨率：0.1轉速在600轉）
接受泵頭號	2
接受泵頭類型	標準，易裝?，易裝易裝3，II，墨盒，高性能，多通道，PTFE管，PTFE隔膜
品牌	Masterflex
型號	07575-10
生產編號	07575-10

Specifications
Product Type	Pump Drive
Max flow rate (mL/min)	3400
Min flow rate (mL/min)	0.006
Control type	Digital Variable Speed
Power (Amps)	2.2 at 115 VAC 1.1 at 230 VAC
Motor (hp)	1/10
Motor (watts)	75
Reversible motor	Yes
rpm	0.1 to 600
IP rating (Drive)	IP66 (NEMA 4X)
Digital dispensing	Yes
Dimensions (Drive)	12"L x 9"W x 9.25"H (30.5 x 22.9 x 23.5 cm)
Speed control	±0.1% (Resolution: 0.1 rpm at 600 rpm)
No. of Pump heads accepted	2
Type of Pump heads accepted	Standard, Easy-Load?, Easy-Load II, Easy-Load 3, High Performance, Cartridge, Multichannel, PTFE Tubing, PTFE Diaphragm
Brand	Masterflex
Model	07575-10
Manufacturer number	07575-10

?