Filter Cartridges單開口端PTFE盒，0.2微米

單開口端PTFE盒，0.2微米

集合，以適應廣泛的關鍵應用

絕對額定用于許多監管過程

滿足廣泛的行業和政府標準

這些國有企業的墨盒有222 O型環配置來創建一個密封，防止進水繞行。它們是耐高壓加熱到250°F（121℃）和在線滅菌至257°F（125℃）達30分鐘的循環;耐10小時的累積曝光。該過濾器還可以消毒兼容化學劑。所有的墨盒都適合到180°F（82°C），在10 PSID。使用SOE盒油底殼適配器套件（另售）外殼內固定墨盒。

該盒符合美國CFR標題21的重復接觸食品的準則，符合美國藥典VI-121℃塑料指導方針，并通過MEM洗脫細胞毒性試驗。水性提取物含有低于0.25 EU / mL和通常表現出的非揮發性殘余物的低水平。

采用熱焊代替粘接劑或添加劑百褶聚四氟乙烯濾芯潔凈室建造。理想的更積極的液體或空氣/氣體過濾應用。疏水預濕液過濾之前（為了與水溶液使用，預先潤濕用甲醇，然后在使用前用清水沖洗）。

技術指標

產品型號                 濾芯

長度（英寸）             10

孔的尺寸（微米）         0.2

材料                     PTFE

過濾面積                 5.9平方英尺

A collection to fit a wide range of critical applications

Absolute-rated for use in many regulated processes

Meets a wide range of industry and government standards

These SOE cartridges have a 222 O-ring configuration to create a tight seal and prevent influent bypass. They are autoclavable to 250°F (121°C) and in-line sterilizable to 257°F (125°C) for up to 30-minute cycles; tolerant to an accumulated exposure of 10 hours. The filters may also be sanitized with compatible chemical agents. All cartridges are suitable to 180°F (82°C) at 10 psid. Use a SOE cartridge-sump adapter kit (sold separately) to secure cartridges within housings.

The cartridges comply with US CFR Title 21 guidelines for repeated food contact, comply with USP Class VI-121°C Plastics guidelines and pass the MEM Elution Cytotoxicity Test. Aqueous extracts contain less than 0.25 EU/mL and typically exhibit low levels of non-volatile residues.

Pleated PTFE Cartridges Cleanroom-constructed using thermal welding instead of adhesives or additives. Ideal for more aggressive liquid or air/gas filtration applications. Hydrophobic—prewet before liquid filtration (To use with aqueous solutions, prewet with methanol, then rinse with water before use).

Specifications

Product Type     Filter Cartridges

Length (in.)     10

Pore size (μm)     0.2

Material     PTFE

Filtration area     5.9 ft2