Parker AO-010ANFX 多明尼克漢德空氣預濾器

Parker AO-010ANFX 多明尼克漢德空氣預濾器

  先進的氣流技術，使最高效節能的壓縮空氣過濾系統

   預過濾器和微型過濾器具有內部浮漏，易于安裝和節省初始成本

   事件監聽器（包括大多數型號）提醒您高壓差和需要濾芯變化

   房屋是完全腐蝕保護，并進行了10年的保修期

   這些模塊化的過濾器是高效率的壓縮空氣過濾需要的答案。過濾器殼體是Alocrom處理的鋁與高品質的干粉末環

氧面漆。外殼在正常工作條件下，進行了10年的保修期。這些過濾器最新的國際標準ISO 8573.1空氣質量標準達

到或超過預過濾床深褶疏油納米纖維下降到1微米，包括水和油氣溶膠粒子去除。在70°F（0.6 MG/M3 21°

C）。微過濾床深褶疏油下降到0.1微米，包括水和油氣溶膠粒子去除納米纖維提供最大殘留油份含量為

0.5ppm 。在70°F（21°C）0.01 MG/M3最大殘留油份含量為百萬分之0.1。活性炭過濾器使用活性炭深床元素

吸附氣體，氣態烴和異味;墨盒也提高剩余油去除結合使用時，與微型過濾器。在70°F（0.003 MG/M3在21°C）

最大殘留油蒸汽的含量為百萬分之0.003。加入相鄰過濾器串聯安裝在使用可選的安裝夾具。安裝夾墻壁安裝支

架，以盡量減少相關的硬件功能。

   Advanced airflow technology makes this the most energy efficient compressed air filtration system available

    Prefilters and microfilters feature an internal float drain that eases installation and saves initial cost

    Incident monitor (included on most models) alerts you to high differential pressure and need for filter element change

   Housing is fully corrosion protected and carries a 10-year warranty

   These modular filters are the high-efficiency answer to your compressed air filtration needs. The filter housing is Alocrom-treated aluminum with a high-quality dry powder epoxy finish. Housings carry a 10-year warranty under normal operating conditions. These filters meet or exceed the latest International ISO 8573.1 air quality standard.
   Prefilters are deep bed pleated oleophobic nanofiber delivering particle removal down to 1 micron—including water and oil aerosols. Maximum remaining oil aerosol content is 0.5 ppm at 70°F (0.6 mg/m3 at 21°C).
   Microfilters are deep bed pleated oleophobic nanofiber delivering particle removal down to 0.1 micron—including water and oil aerosols. Maximum remaining oil aerosol content is 0.1 ppm at 70°F (0.01 mg/m3 at 21°C).
   Activated Carbon Filters use a deep-bed activated carbon element to adsorb vapors, gaseous hydrocarbons, and odors; cartridges also enhance residual oil removal when used in combination with microfilters. Maximum remaining oil vapor content is 0.003 ppm at 70°F (0.003 mg/m3 at 21°C).
Use optional mounting clamps to join adjacent filters mounted in series. Mounting clamp also functions as a wall-mounting bracket to minimize associated hardware.