Cole-Parmer?可編程雙注射器輸液/退出泵，230 VAC,EW-74901-05

Cole-Parmer?可編程雙注射器輸液/退出泵，230 VAC

需要精度低流量，低壓力的應用的理想選擇

內置程序，您可以輸入最多8個指令，以執行多種功能，你甚至可以重復指令十倍，所有的設置都存儲在非易失性存儲器中

泵設有一個寬動態范圍（100000:1）允許流速從一個緩慢滴入，以源源不斷

RS-232接口，讓您從個人電腦上使用一些簡單的命令偉大的菊花鏈泵泵操作！

背光字母數字LCD會引導您完成安裝和操作程序

程序流速保持，暫停，和方向的改變，每個命令可以被設置為運行長達12小時。你甚至可以編程輸液泵/退出序列操作：要么撤退，然后輸液或輸液其次，通過撤出。選擇接受兩個10注射器理想的泵送準確的比例泵。

泵還具有兩個TTL輸入和兩路TTL輸出。TTL輸入，讓您使用的過程腳踏開關或定時器控制泵的運轉。使用TTL輸出為5 V的信號和運行指標。所有型號包括一個6英尺電源線與接地插頭（美國標準插頭115 VAC型號上，歐洲插頭230 VAC型號。包含的內容：一個6英尺電源線與接地插頭（美國標準插頭115 VAC模型和歐式插頭上230 VAC型號）。

Cole-Parmer? programmable dual-syringe infusion/withdrawal pump, 230 VAC

Ideal for low-flow, low-pressure applications where precision is needed

Built-in program lets you enter up to eight commands to perform a variety of functions—you can even repeat commands up to ten times; all settings are stored in nonvolatile memory

Pumps feature a wide dynamic range (100,000:1) allowing for flow rates from a slow trickle to a steady stream

RS-232 interface lets you operate your pump from a personal computer using a few simple commands—great for daisy-chaining pumps!

Backlit alphanumeric LCD steps you through setup and operating procedures

Program flow rate hold, pause, and change of direction; each command can be set to run for up to 12 hours. You can even program infusion/withdrawal pumps to sequence operations: either withdrawal followed by infusion or infusion followed by withdrawal. Choose pumps which accept two up to ten syringes—ideal for pumping exact proportions.
Pumps also feature two TTL inputs and two TTL outputs. The TTL inputs let you use a footswitch or a process timer to control pump operation. Use TTL outputs for 5 V signal and run indicator. All models include a 6-ft cord with grounded plug (U.S. standard plug on 115 VAC models, European plugs on 230 VAC models.

What's Included:
a 6-ft cord with grounded plug (U.S. standard plug on
115 VAC model and European plug on 230 VAC models).