0.45微米 單開口端的聚丙烯盒

0.45微米 單開口端的聚丙烯盒

單口開端（SOE）系統最大的差壓力為60psi。可在250°F（121°C）高溫高壓滅菌以及在261°F（127°C）內軸滅菌（特別注明除外）。SOE濾芯有222 O型圈配置，從而鞏固并防止滲水。使用油底殼擴展適配器套件（另售），使濾芯與外殼適配.串行層magna尼龍濾芯有兩個褶尼龍膜頂作為預過濾器。高保留能力和高產量。 

玻璃纖維盒含有硼硅玻璃微纖維交織丙烯酸粘合劑作為保留。使用保護膜過濾系統預過濾器。不在內嵌部分消毒。 

聚丙烯（PP）濾芯中有一個單一的層的過濾介質。化學惰性，高污負荷能力。用預過濾器處理水溶液。疏水; *使用前預濕。不在內嵌部分消毒。 

PTFE膜濾芯具有單層，打褶的PTFE膜層疊的PP的支持。用于氣體過濾和通風。具有疏水性和惰性;*過濾水溶液時預濕

有一個單層的PES膜半導體濾芯。每沖洗的18 M？水，以保證濾液的清潔和快速電阻率恢復。擴散率在30psi 12 mL / min。

Single open end (SOE) systems have a maximum differential pressure of 60 psi. They are autoclavable at 250°F (121°C) and in-line sterilizable (except where noted) at 261°F (127°C). SOE cartridges have a 222 O-ring configuration to create a tight seal to prevent seepage. Use sump extension adapter kit (sold below) to fit cartridges into housings.Serial-layer magna nylon cartridges have two pleated nylon membranes—top acts as a prefilter. High retention capacity and high yields. 

Glass fiber cartridges contain interwoven borosilicate glass microfibers held by acrylic binders for exceptional retention. Use as a prefilter to protect membrane filter systems. Not in-line sterilizable. 

Polypropylene (PP) cartridges have a single-layer filter media. Chemically inert with high dirt-loading capacity. Use as a prefilter for aqueous solutions. Hydrophobic; prewet* before use. Not in-line sterilizable. 

PTFE membrane cartridges have a single layer, pleated PTFE membranes laminated to a PP support. Use for gas filtration and venting. Hydrophobic and inert; prewet* when filtering aqueous solutions. 

Semiconductor cartridges have a single-layer PES membrane. Each is flushed with 18 M? water to assure downstream cleanliness and rapid resistivity recovery. Diffusion rate of 12 mL/min at 30 psi.

產品規格

產品類型 濾芯

孔徑（μm） 1

材料 聚丙烯

過濾面積 4.0平方英尺

Specifications

Product Type Filter Cartridges

Pore size (μm) 1

Material Polypropylene

Filtration area 4.0 ft2